How To Guide
Educate Employees
The first step to finding a great pair of prescription safety glasses is understanding the specific hazards that your eyes face on a regular basis. Are you in an environment where chemical exposure is a possibility? Are you at risk of projectile impact on your job site? Take factors like these into consideration when you’re shopping for bifocal safety glasses and look for a pair that’s specifically designed for the eye hazards you may encounter.
Lead by Example
Consider where you are going to be riding. This can make a big difference in what will be the right eyewear for your needs.
- Track: On the track, you primarily need to look forward (blind spots are not typically as important) and you are dealing with a lot of wind. Typically, a helmet with a visor will be the best option. If you need corrective lenses, consider wearing contact lenses underneath.
- Street: When you are riding on the street, you likely aren’t going as fast as on the track. However, there are other drivers to contend with. Motorcycle safety glasses or goggles are likely ideal options at lower speeds. At higher speeds, you may need a helmet visor.
- Off-Road: On the trail, you will usually be at much lower speeds than the track or street. However, there is a lot of debris and mud to deal with. Usually, motorcycle goggles are the best option.
Give Them Safety Glasses Options
You will measure your temple-to-temple width to figure out the total width of your glasses, including the frames, lenses, and bridge. This measurement is used to determine the most appropriate full width of prescription glasses online to fit your face best. For this measurement, you will need a mirror and a rule. Using a photo for this measurement is inappropriate because it cannot be scaled to the accurate sizing; use only a mirror and a ruler for best results. You will measure from your left temple to your right temple. To do so, hold the ruler below your eyes in a horizontal position and measure the distance between the two temples and record your measurement for total width.
- Note
Another vital part of gathering all of your face measurements is yet another temple measurement; this one isn’t from your temples; it is for the temples or arms of the glasses. To determine the correct length of temples for your glasses, you will use your total width. Temples on glasses usually come in three preset sizes but can also be found in ranges from 4.7 – 5.9 inches. The larger the whole width of your face, the larger the temples will need to be on your glasses.
Consistently Enforce Policies
Finally, you should consider upgrading your eye protection. Many modern designs were created with vision in mind. They are specially intended to make it easier to see while staying safe. You could switch to a pair of safety glasses with good peripheral visibility, for example. A small upgrade can potentially make a big difference.
If your eyewear is older, it may have superficial damage or discoloration that makes seeing harder. Again, upgrading to a newer option can help. It is important to buy new protective gear periodically to ensure that it can keep you completely safe.
FAQs
What are some reasons your employees will not use safety goggles?
Your workers may have various reasons for not wearing proper eye protection while on the job. Some of the top causes of non-compliance include:
- Discomfort due to improper fit or low-quality
- Lack of understanding regarding the importance
- Unaware of your PPE policies
- Allergies or skin conditions that result in irritation
How do you encourage your staff to wear protective eyewear?
Some of the ways you can support eye safety at your workplace include:
- Training your team about the importance of safety glasses
- Enforcing your policies consistently
- Providing options with a prescription safety eyewear program
- Setting the example by wearing your eye protection
- Allowing employees to choose the glasses that fit best
Can you make it mandatory for your employees to wear safety glasses?
The Occupational Safety and Health Administration provides rules regarding eye protection that employers must follow. Business owners must assess the hazards in their workplace and determine what type of eye safeguards workers need. If the OSHA standards apply to your company, you can require your staff to wear safety goggles.
Are you required to pay for your employee's prescription safety glasses?
Under OSHA requirements, you must provide PPE for employees. However, you are typically not required to purchase prescription safety goggles as workers can place standard safety glasses on their corrective lenses. When you have a prescription safety glasses program, your staff can access top-quality eyeglasses with a streamlined ordering process.
What is the OSHA standard for safety glasses?
OSHA requires that you provide eye protection for your employees if they have exposure to hazards, such as:
- liquid chemicals
- molten metal
- chemical vapors
- caustic liquids or acids
- flying objects
