How to Clean Safety Glasses in 6 Easy Steps


People who work in construction, auto repair, welding, lab technicians, manufacturing, and even athletes are at an elevated risk of sustaining an eye injury.

Such people need to invest in a pair of high-quality protective eyewear to protect themselves from eye injuries. However, prevention does not stop there, you need to know how to clean safety glasses. If you own a pair of safety glasses, here are six steps you should follow:

Steps to clean your safety glasses

1.    Perform Maintenance Care

The first step to finding a great pair of prescription safety glasses is understanding the specific hazards that your eyes face on a regular basis. Are you in an environment where chemical exposure is a possibility? Are you at risk of projectile impact on your job site? Take factors like these into consideration when you’re shopping for bifocal safety glasses and look for a pair that’s specifically designed for the eye hazards you may encounter.

2.    Dust off Any Debris and Dirt from the Safety Goggles

Consider where you are going to be riding. This can make a big difference in what will be the right eyewear for your needs.

  • Track: On the track, you primarily need to look forward (blind spots are not typically as important) and you are dealing with a lot of wind. Typically, a helmet with a visor will be the best option. If you need corrective lenses, consider wearing contact lenses underneath.
  • Street: When you are riding on the street, you likely aren’t going as fast as on the track. However, there are other drivers to contend with. Motorcycle safety glasses or goggles are likely ideal options at lower speeds. At higher speeds, you may need a helmet visor.
  • Off-Road: On the trail, you will usually be at much lower speeds than the track or street. However, there is a lot of debris and mud to deal with. Usually, motorcycle goggles are the best option.

3.    Rinse Safety Goggles Using Lukewarm Water

You will measure your temple-to-temple width to figure out the total width of your glasses, including the frames, lenses, and bridge. This measurement is used to determine the most appropriate full width of prescription glasses online to fit your face best. For this measurement, you will need a mirror and a rule. Using a photo for this measurement is inappropriate because it cannot be scaled to the accurate sizing; use only a mirror and a ruler for best results. You will measure from your left temple to your right temple. To do so, hold the ruler below your eyes in a horizontal position and measure the distance between the two temples and record your measurement for total width.

  • Note

Another vital part of gathering all of your face measurements is yet another temple measurement; this one isn’t from your temples; it is for the temples or arms of the glasses. To determine the correct length of temples for your glasses, you will use your total width. Temples on glasses usually come in three preset sizes but can also be found in ranges from 4.7 – 5.9 inches. The larger the whole width of your face, the larger the temples will need to be on your glasses.

4.    Use a Toothbrush to Clean the Frames

Finally, you should consider upgrading your eye protection. Many modern designs were created with vision in mind. They are specially intended to make it easier to see while staying safe. You could switch to a pair of safety glasses with good peripheral visibility, for example. A small upgrade can potentially make a big difference.

If your eyewear is older, it may have superficial damage or discoloration that makes seeing harder. Again, upgrading to a newer option can help. It is important to buy new protective gear periodically to ensure that it can keep you completely safe.

5.    Use Microfiber Bag to Clean the Lenses

To choose the best prescription glasses online, the final piece of information you need to determine is your face shape. Your lens shape and frames should complement your face shape. For this measurement, you will need a mirror, but a photo and a friend will also likely be helpful. Compare your face to these four basic shapes to determine which one your face best corresponds with: circle, square, oval, or heart-shaped. This determination will help match your face shape to the ideal lens shape when shopping for frames.

  • Features

Using facial features, you can determine which face shape you have. Using your face shape, you will be able to select glasses to match. Oval faces have broad and high cheekbones that come to a rounded end at the chin and the forehead. Square faces have broad foreheads and defined jawlines. Heart-shaped faces have wide foreheads with high cheekbones. Circle or round faces feature equal length and width and often appear wider across the cheek area. Remember that safety glasses and goggles require a snug fit for regulatory wear. Still, other prescription glasses may be worn in oversize styles that are more trendy if that is your preference. Consider the following combinations:

  • Oval + oversize, square, broad, rectangular, or trapezoid
  • Square + rounded and dark, rimless, cat-eye or semi-rimless
  • Heart + thin, light, wide, rimless, or aviator
  • Circle + full-rim, semi-rimless, angular, broad, or sharp-angled

To ensure that your shopping experience is as easy and stress-free as possible, be sure to complete your measurements before logging on and making selections for prescription glasses online.

6.    Place Protective Eyewear in a Glasses Case

Once you have determined your magnifier diopter strength, chosen a lens material, and found the best frames…you’re ready to place your order! You’ve done all the hard work, and ordering your bifocal safety glasses is easy. Simply log on to, find the glasses you want, and add them to your cart. You will be prompted to enter the information for your prescription safety glasses, and then you will be able to proceed to checkout. At checkout, you will indicate your shipping address as well as your payment method and your billing address.